Tazasil · Silicate resin
Tazasil CW, for 0–15 °C.
Cold-curing, non-foaming two-component silicate resin for processing at 0–15 °C. Gel time 7 min and curing time 45 min at 21 °C.
Technical data
Application
- Processing temperature
- 0–15 °C
Times at a test temperature of 21 °C
- Gel time
- 7 min
- Curing time
- 45 min
The times were measured at 21 °C. This is the test temperature, not the processing temperature range. Gel time is not the same as pot life.
Technical data common to all three resins
- System type
- Two-component silicate resin
- Behaviour
- non-foaming, components mix well
- Mixing ratio A : B
- 1 : 2 (by volume)
- Storage temperature
- 0–30 °C
- Density of component A at 23 °C
- 1.50–1.55 g/cm³
- Density of component B at 23 °C
- 1.24–1.25 g/cm³
- Viscosity of component A at 23 °C
- 200–500 mPa·s
- Viscosity of component B at 23 °C
- 300–400 mPa·s
- pH of component A
- alkaline
- pH of component B
- neutral
Values as per technical information from PS Resins.
Processing
- Curing method
- cold-curing
- Processing temperature
- 0–15 °C
- Mixing ratio A : B
- 1 : 2 (by volume)
- Storage temperature
- 0–30 °C
- Two-component system: components A and B are mixed at a ratio of 1 : 2 by volume.
- Components A and B mix well; mixing different Tazasil resins is not approved.
- Gel time and curing time apply at 21 °C. Gel time is not a pot life value.
Documents
We send data sheets on request.
Project enquiry